Model
|
T3DSO1102
T3DSO1104 |
T3DSO1204 |
| Bandwidth |
100 MHz |
200 MHz |
| SamplingRate (Max.) |
Two channel series have a single 1 GSa/s ADC, four channel series have two 1 GSa/s ADCs. When all channels are enabled, each channel has a maximum sample rate of 500 MSa/s. When a single channel per pair is active, that channel has sample rate of 1 GSa/s |
| Channels |
4 (four channel series) 2+EXT (two channel series) |
| Memory Depth (Max.) |
7 Mpts/CH (not interleave mode); 14 Mpts/CH (interleave mode) |
| Waveform Capture Rate (Max.) |
100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode) |
| Trigger Type |
Edge, Slope, Pulse Width, Window, Runt, Interval, Dropout, Pattern, Video |
| Serial Trigger and decoder (Standard) |
IIC, SPI, UART/RS232, CAN, LIN |
16 Digital Channels
(four channel series only, option) |
Maximum waveform capture rate up to 1 GSa/s,
Record length up to14 Mpts/CH |
USB AWG module
(four channel series only, option) |
One channel, 25 MHz, sample rate of 125 MHz, wave length of 16 kpts |
| Bode plot ( four channel series only) |
Minimum start frequency of 10 Hz, minimum scan bandwidth of 500 Hz, maximum scan bandwidth of 120 MHz (dependent on Oscilloscope and AWG bandwidth), 500 maximum scan frequency points |
USB WIFI adapter
(four channel series only, option) |
802.11b/g/b, WPA-PSK, the adapter must be purchased separately by the scope user (TP-Link TL-WN725N) |
| I/O |
USB Host, USB Device, LAN, Pass/Fail, Trigger Out, Sbus
(Teledyne Test Tools MSO) |
| Probe (Std) |
2/4 pcs passive probe T3PP300 |
2/4 pcs passive probe T3PP300 |
| Display |
7 inch TFT-LCD (800 x 480) |
| Weight |
Four channel series: Without package 2.6 Kg; With package 3.8 Kg Two channel series: Without package 2.5 Kg; With package 3.5 Kg |
