AFG100 Function Generator
제품 소개
AFG-100
AFG100 Function Generator
주요 특징 및 기능
• 0.01㎐ - 12.5M㎐ arbitrary generator with DDS (Direct Digital Synthesis)
• Max. sample rate 33MS/S
• Arbitrary， sine， square wave， triangle， ramp signal
• Accuracy of frequency setting - ±0.01% ±0.002㎐
• Internal sweep (sweep time 10ms~60s)-sweep mode (linear, logarithmic - discrete)
• Amplitude Modulation - internal (depth, frequency), external
• Synchronization output - square wave signal (COMS / TTL level)
• DCV offset adjusted within a wide range
• Auto - calibration
• Protection of the signal output - if an external voltage V＞± 15V, switches itself off automatically
• LCD adjustment (bright / contrast)
• Pre-setting(memory)- store / recall
• RS-232C interface
• Radio interference suppression - EN 55011 Class B
• Safety class - I according to EN 61010 Part 1
제품 사양
| |
| |
|
racy of output voltage at f =1㎑ |
±(2% + 20㎷) |
|
Additional frequency error of output voltage |
±1dB in the range 10㎐...1M㎐,±3 dB 0.01㎐...10M㎐ |
|
Temperature coefficient of output voltage |
<±5 × 10-3 / K |
|
Direct voltage offset of signal(Voffset) |
±2.5V in 10㎷ steps |
|
Accuracy of offset voltage setting |
±(1% + 20㎷) |
|
Output signal |
sinusoidal, square wave, triangular, ramp(up, down) arbitrary |
|
Distortion factor of sinusoidal signal |
<0.5% in the range 10㎐... 100㎑ |
|
Rise time of square wave signal |
<25ns |
|
Overshoot of square wave signal |
<0.5% + 30㎷ |
|
Non-linearity of triangular signa
l(5%... 95%) |
<1% | |
|
|
Arbitrary signal characteristics | |
|
Horizontal resolution(length of signals) |
8192 points |
|
Vertical resolution of level |
1024 points (10 Bit) |
|
Sample period |
30ns × 2N-1, N=1...32 | |
|
|
|
|
Frequency change for the SWEEP function |
0.01㎐... 12.5M㎐ (100㎑ for triangular and ramp signals) |
|
Sweep type |
linear, logarithmic - discrete |
|
Direction of frequency change |
rising, falling |
|
Period of repetition for the SWEEP function |
10ms... 60s | |
|
|
|
|
Source of modulation signal |
internal, external |
|
Frequency range of external modulation input |
0 ㎐... 20 ㎑ |
|
Amplitude of external signals (Vpp) |
2V for AM modulation depth m = 100% |
|
Input impedance of external AM input |
100 ㏀ |
|
Frequency range of internal modulation oscillator |
from approx. 100㎐ to approx. 10㎑, discrete frequency values |
|
Depth of amplitude modulation |
0 to 100%, 1% steps for internal generator of AM | |
|
|
Square wave synchronization output | |
|
Output voltage Vpp |
5V±10% CMOS |
|
Duty cycle of output signal |
approx. 1:1 for periodical signals pulse "Start" with a width of approx. 5μs at the sweep function | |
|
|
|
|
Nominal temperature |
+ 23 °C ± 2 °C |
|
Operating temperature |
+ 5 °C ... + 40 °C |
|
Relative humidity |
20 to 80% |
|
Atmospheric pressure |
70 to 106 kPa |
|
Operating position |
horizontal or inclined by ±15 ° |
|
Operating voltage |
alternating voltage 230V /` 115V(+10%,-15%), 47-63 ㎐ |
|
Power consumption |
27VA (max. 27W) |
|
Safety class |
l according to EN 61010 -1 |
|
Radio interference suppression |
EN 55011 Class B |
|
Dimensions (W × H× D)
Dimensions of packing |
225 mm × 85 mm × 200 mm
315 mm × 115 mm × 270 mm |
|
Weight
Weight incl. packing and accessories |
approx. 2.5 kg
approx. 3.5 kg | | |
System interfaces
The AFG 100 can be fully controlled and read out via the serial interfaces RS-232C.
The data transfer is based on the ASCII character set.
|
주문 정보
Warranty
• 1 YRs
Contents
• AFG100 Function Generator
• mains cable
• coaxial cable
• operating instruction
• spare fuses
• diskette
